Junctional Adhesion Molecule 2 (JAM2) BioAssay(TM) ELISA Kit (Human)

The Human Junctional Adhesion Molecule 2 (JAM2) ELISA Kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of JAM2 in human serum, plasma, tissue homogenates and other biological fluids.\n\nDetection Range:\n31.2 - 2000pg/ml \n\nSensitivity:\n13.8pg/ml\n\nPrecision:\nIntra-Assay: CV<10%\nInter-Assay: CV<12%\n\nTest Principle:\nThe microtiter plate provided in this kit has been pre-coated with an antibody specific to JAM2. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to JAM2. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain JAM2, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm пїЅ 10nm. The concentration of JAM2 in the sample is then determined by comparing the O.D. of the sample to the standard curve.\n\nKit Components:\n*152750A: Microtiter Plate, 1x96 wells, Pre-coated; ready to use\n*152750B: Standard, 2x1vial \n152750C: Standard Diluent, 1x20ml\n*152750D: Detection Reagent A, 1x120ul \n*152750E: Detection Reagent B, 1x120ul \n152750F: Assay Diluent A, 1x12ml\n152750G: Assay Diluent B, 1x12ml\n152750H: TMB Substrate, 1x9ml\n152750K: Stop Solution, 1x6ml\n152750L: Wash Buffer, 30x, 1x20ml \n\nStorage and Stability:\nStore *152750A, *152750B, *152750D and *152750E at -20 degrees C. Store all the other components at 4 degrees C. Unused kit is stable for 6 months. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.\n\nAssay Procedure Summary:\n1. Prepare all reagents, samples and standards.\n2. Add 100ul standard or sample to each well. Incubate 2 hours at 37 degrees C.\n3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37 degrees C.\n4. Aspirate and wash 3 times.\n5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37 degrees C.\n6. Aspirate and wash 5 times.\n7. Add 90ul TMB Substrate. Incubate 15-25 minutes at 37 degrees C.\n8. Add 50ul Stop Solution. Read at 450nm immediately.

Prices direct from United States Biological

Quick response times

Exclusive Biosave savings/discounts